Electric ball valve is a high energy saving and long life product.It is mainly used for on-off control of HVAC water system,It is composed of electric driver and valve body.The driver (actuator) is driven by synchronous motor with stable action.When the valve is opened and the door is closed, the motor starts (electric power consumption 6W), Open valve or close valve action cycle time is 5-15 seconds,More than two line electric valve energy saving tens of times.(Because the electric ball valve only in the valve opening or closing state to work, the two-line electric ball valve opening motor has been energized). Therefore, the life of this product is several times that of the two-line electric valve.
Electric Brass Ball Valve 3way Ball Valve
Description
- Features:
- Direct flow, large flow, no slag blocking.
- Good waterproof and Dust proof function.(IP65)
- The cold/heat of the valve and the cold/heat of the environment
- cannot be transmitted into the actuator.
- The actuator is easy to disassemble and assemble.
- The actuator can be installed after the installation of equipment
- and pipeline, which is more conducive to improving installation efficiency
- When the valve is on and off, the signal lamp indicates the working state, and the valve is automatically detected whether it is fully
- open or fully closed.
- High energy saving and long life design.
- Because of the eccentric structure of the actuator, the valve can be mounted against the wall
- The closing pressure difference is large and the closing is strict.
- Remove the ball valve of the driver can be switched with a common tool.
- Actuator can be assembled in two directions, easier wiring and maintenance.
- Flexible opening of valve can effectively prevent water hammer
