- Special design
- Gather both bypass and check features
- Lowest flow defense
- No outside actuation needed
-
Automatic Recirculation Valve (ARV) is a multifunctional valve that primary purpose is to ensure a pre-determined minimum flow is assured through a centrifugal pump at all times. This in turn has created a need for centrifugal pumps with high heads and low specific speeds. -
Parameters of Pneumatic Actuator- Type: Diaphragm type
- Effective Area: 350-140cm2
- Spring Range: 20-100MPa
- Air Supply: 140-400KPa
- Ambient Temperature: -30~+70℃
-
We are specialized manufacturing superior grade Control Valve. These are the Control Valve that are widely used to limit the amount of flow in the hydraulic circuits of various industrial applications. Our offered Control Valve are equipped with a specially designed screw that exhausts the air. The offered valves are available in wide range of technical specifications which can be ordered at the best price in the industry. -
Three way control valve with Pneumatic actuator A type of globe valve that has three pipeline connections to provide general converging (flow-mixing) or diverging (flowsplitting) service. Variations include cage-, port-, and stemguided designs, selected for high-temperature service, and end connections can be specified to mate with most piping schemes. Actuator selection demands careful consideration, particularly for constructions with an unbalanced valve plug. -
Application: Petroleum, chemical & metallurgy Shipbuilding, electric power, building material LNG, light industry -
Application: Petroleum, chemical & metallurgy Shipbuilding, electric power, building material LNG, light industry. Characteristic: Used in automatic control steam, gases, fluids Minor pressure fluctuations and energy efficiency. -
The Globe Control Valve is a kind of top pilot single seat valve, which has simple structure, good sealing, high flow rate and stable application performance. Reasonable top spiral system can avoid vibration during small opening percentage, so as to extend valve working life. -
Medium: Water, Oil, Gas, Acid,Steam, gases, hot water, thermal fluids, hot oil, process water, vacuum facilities, ammonia etc. Materials: WCB,WC6,SS304,SS316 Size range: 2"-24" Pressure: 150LB-1500LB Temperaute: ≤ 425℃ -
Product features- 1/2"-12"(DN15-DN300)
- Working Temperature:-20℃-180℃
- Rising stem
- Design:AMSE B16.34
- Flange Dimension:AMSE B 16.5
- Face to Face :AMSE B 16.10
-
- Design Rating:API600
- Face to Face: AMSE B16.10
- Flange Ends: ASME B16.5
- Inspection& Testing: API 598
- Material: CF8/CF8M/CF3/CF3M/LCB/WCB, LCB, WC6, WC9, C12, C5
- Operated by: Hand wheel, Gear, Pneumatic, hydraulic and Electric actuator.
-
Application: It is widely used in tap water, sewage, construction, food, electricity, medicine, metallurgy, textile, energy systems and other fluids pipeline as a regulator and shutoff device. -
- Working Pressure: Py10, Py16, Py25
- Flange: 12820-15
- Suitable temperature(ºC): ≤425
- Suitable medium: Water, Vapour, Oil, Sewage. Salts, etc.
- Size: DN50-DN1200
- Body Flange Drilling: GOST 12820-15 DIN2501
- Face to Face: GOST/ GB/ DIN3202
- Body Material: Cast steel
- Wedge: cast steel, carbon steel, stainless steel
- Stem: Cast steel, SS304, 2Cr13, stainless steel
- Seat: stainless steel, 2Cr13
- Market: Russia\Ukraine\Belarus\Uzbekistan\Tajikistan
-
- Standards:
- Design and Manufacture: ANSIB16.34, API600 API6D, API603,BS1414
- Face to face(end to end): ANSIB16.10, API6D
- Flange connection: 2″~24″to ANSIB16.5,
- 26″~36″to MSS-SP-44 to API605 on Request
- Test and inspection: API598,API6D
- Butt welded end: ANSIB16.5
-
Applications- Slurries
- Heavy oils
- Non-flammable viscous fluids
- Waste water
- Clean water
-
PRODUCT RANGE- Sizes NPS 1/2 to NPS 4
- Pressure: Class 800 to Class 2500
- SW, NPT, RF or BW
- Outside Screw & Yoke (OS&Y)
- Bolted Bonnet, Welded Bonnet or Pressure Seal Bonnet
-
Forged soft-seated floating ball valves Forged soft-seated floating ball valves are designed according to ISO17292 and are mainly used within applications with a wide pressure and temperature range (150LB~2500LB,-46℃~200℃). It is a cost effective alternative for small-sized trunnion mounted ball valves. The valves are fire safe designed and have been certified per API607 and API6FA. We offers two-piece and three-piece split body designs. -
Carbon steel ANSI class150 ball valve- Temperature range : -60℃ to 450℃
- Face to face : ANSI B16.10
- Flange dimensions : ANSI B16.50
- Wall thickness : ANSI B16.34
- Pressure rating : ANSI 150# , 300#
- All valves 100% test
- Pressure Class 150
-
Metal-seated floating ball valves metal-seated floating ball valves can be applied in wide pressure and temperature ranges (150LB~2500LB and -46~450℃). The metal seat provides an optimal resistance against wear caused by abrasive services or hard particles. Size：1/2"~ 8"(DN15~DN200) Pressure Rating: ASME CLASS 150~2500(PN16~PN420) Body material：Carbon steel, Stainless steel, Alloy steel, Duplex stainless steel,exotic alloy etc. End connection：FLNG, BW Operation：Manual, Pneumatic, Electric, Hydraulic,ect. -
Standard Features ASME classes 150 to 600 1/2” to 8” (15 mm to 200 mm) size range. Floating ball valve seat configuration Unibody construction Dual body seal design Flanged – raised face end connections Upstream hole in ball or cavity pressure-relieving seats Casting type: Investment cast - 1/2” to 3” (15 mm to 75 mm) Sand cast - 4” (100 mm) and above -
Applicable Standards: Ball Valve design according to API6D,BS5351,ASME B16.34 Face to face ASME B16.10,AP6D End Flanges ASME B16.5/ASME B16.47 Butt welded ends ASME B16.25 Fire Safety API607,API6A Inspection and test API 598,API6D Material: WCB Size Range: 2"~16" Pressure Rating: ASME CL, 150, 300, 600 Temperature Range: -29°C~425°C Type: Top entry, Flanged Ends -
Application standards:- Design and manufacture: API600, ANSI B16.34
- Face to face: ANSI B16.10
- Flange end: ANSI B16.5
- Inspection: API 598
- Pressure-temp rating: ANSI B16.34
-
Product Overview
Integrated high temperature ball valve is overall high temperature ball valve which use the new sealing material for the valve seat, The service life is increased 3-5 times. The advantages ot this ball valve : stable performance, reliable sealing, small friction, light switch, high temperature resistance, wear resistance, oil resistance, corrosion resistance, long service life . Suitable medium: water, steam, heat conducting oil and other acids, Temperature：≤350℃。 -
Description Heating jacket is a device that maintains process media temperature in valve body. It is welded to valve body. After welding, there is an additional space between outside of the valve body and the inside of the jacket. It allows hot media to pass through, which is usually steam, hot oil or hot water. The standard SS 304 jacket can stand the thermal heating media no larger than 6 bar (87 psi), for larger pressure.
