-
Product features- 1/2"-12"(DN15-DN300)
- Working Temperature:-20℃-180℃
- Rising stem
- Design:AMSE B16.34
- Flange Dimension:AMSE B 16.5
- Face to Face :AMSE B 16.10
-
- Y Type Strainer
- Bolted bonnet cap with drain plug
- Perforated stainless steel screen
- Strainer density 20 mesh,40 mesh,60 mesh,80 mesh,120 mesh, and so on design
- Full range of strainer density
- Renewable strainer density
- Flanged or butt welding ends
-
- Product Name: Y Strainer
- Size:1/2~12" (DN15~DN300)
- Working Pressure:150~600LB (PN16~PN150)
- Connection Type:RF, RTJ,BW, SW, NPT,WAFER
- Medium:Sea Water, Oil, Gas, Steam, Corrosive Fluid
-
Wafer Soft Seal Butterfly Valve uses the flexibility of rubber seat, could easily achieve zero leakage, Wafer type is the common style of butterfly valve and is less expensive than the lug type. The wafer butterfly valve is installed between two flanges. The valve is kept in place by using bolts or studs and nuts from flange to flange. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. -
Three way control valve with Pneumatic actuator A type of globe valve that has three pipeline connections to provide general converging (flow-mixing) or diverging (flowsplitting) service. Variations include cage-, port-, and stemguided designs, selected for high-temperature service, and end connections can be specified to mate with most piping schemes. Actuator selection demands careful consideration, particularly for constructions with an unbalanced valve plug. -
Main material:- Body Materials: CARBON STEEL, STAINLESS STEEL, ALLOY STEEL, DUPLEX STEEL
- Seat Materials: NBR, EPDM, VITON, PTFE
- Disc Materials: Ductile Iron, WCB, CF8,CF8M, Al-bronze C958
- Stem Materials: SS416, SS304, SS316
- End Connection: Double Flange, Lug, Wafer
- Operate: Manual, Worm gear, Pneumatic, Electric-Motorized
- Disc type: With-pin, One stem no-pin, Double stem no-pin
-
- Valve Type: T-type strainer
- Connection Type: Flange
- Temperature Range: normal temperature
- Size: DN25~DN300
- Nominal Pressure: PN2.5MPa
-
- Design Rating:API600
- Face to Face: AMSE B16.10
- Flange Ends: ASME B16.5
- Inspection& Testing: API 598
- Material: CF8/CF8M/CF3/CF3M/LCB/WCB, LCB, WC6, WC9, C12, C5
- Operated by: Hand wheel, Gear, Pneumatic, hydraulic and Electric actuator.
-
Flange swing check valve suitable for nominal pressure 1.6~25MPa. Operating Temperature -29~550℃ oil,chemical, pharmaceutical, fertilizer, power industry and other conditions of pipeline , for medium, water, oil, steam and acid media, etc. Swing check valve, also known as a one-way valve or check valve, its role is to prevent the pipeline medium back flow. H44H swing check valve is to rely on the flow of the medium itself and automatically open, close the disc, used to prevent the reverse flow of the medium of the valve. Check valve is also a kind of automatic valve, its main function is to prevent the reverse flow of the medium, to prevent the reversal of the pump and the driving motor, and the discharge of the medium of the container. -
Standard Features ASME classes 150 to 600 1/2” to 8” (15 mm to 200 mm) size range. Floating ball valve seat configuration Unibody construction Dual body seal design Flanged – raised face end connections Upstream hole in ball or cavity pressure-relieving seats Casting type: Investment cast - 1/2” to 3” (15 mm to 75 mm) Sand cast - 4” (100 mm) and above -
Stainless steel globe valve is a kind of globe valve, the valve body material requirements are relatively high generally have SS301, SS304, SS316 and other material. It widely used in chemical industry, ship, medicine, food machinery and other industries. Stainless steel globe valve is divided into manual stainless steel globe valve, pneumatic stainless steel globe valve and electric stainless steel globe valve. -
Application: Petroleum, chemical & metallurgy Shipbuilding, electric power, building material LNG, light industry -
Application: Petroleum, chemical & metallurgy Shipbuilding, electric power, building material LNG, light industry. Characteristic: Used in automatic control steam, gases, fluids Minor pressure fluctuations and energy efficiency. -
- Working Pressure: Py10, Py16, Py25
- Flange: 12820-15
- Suitable temperature(ºC): ≤425
- Suitable medium: Water, Vapour, Oil, Sewage. Salts, etc.
- Size: DN50-DN1200
- Body Flange Drilling: GOST 12820-15 DIN2501
- Face to Face: GOST/ GB/ DIN3202
- Body Material: Cast steel
- Wedge: cast steel, carbon steel, stainless steel
- Stem: Cast steel, SS304, 2Cr13, stainless steel
- Seat: stainless steel, 2Cr13
- Market: Russia\Ukraine\Belarus\Uzbekistan\Tajikistan
-
Application Suitable for all concentrations of aqua, sulfuric acid, hydrochloric acid, hydrofluoric acid and all kinds of organic acids, strong acids, strong oxidants, also suitable for all concentrations of strong alkali organic solvents and other corrosive gases, liquid medium pipeline. -
Design Short Wafer type Double Flanged Centric Disc Butterfly Valves with Single Piece Rubber Lined Body Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN Size Range 3" to 48" Shaft AISI 410 / AISI 304 / AISI 316 / AISI 316L -
The flange Y Strainer is applicable to water, oil and gas. It's function is to allow scale and dirt residue to be caught, preventing the chance of damage to equipment. The strainer allows full flow of liquid with only minimal pressure loss. The removable cover allows easy access to the basket for cleaning. Face to face dimensions according F6. Stainless steel filter with round pierced screen, pierces diameter 1,5 mm for strainers up to DN 150, and 2 mm for strainers up to DN 300. Removable filtering element, threaded drain. Maximum working temperature <120°C. -
Applications include:- Heating systems
- Water treatment
- Gas flow control
- Liquid flow control
-
Oxygen globe valve is a forced seal valve, so when the valve is closed, pressure must be applied to the disc, in order to force the sealing surface does not leak. -
Parameters of Pneumatic Actuator- Type: Diaphragm type
- Effective Area: 350-140cm2
- Spring Range: 20-100MPa
- Air Supply: 140-400KPa
- Ambient Temperature: -30~+70℃
-
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications. -
Metal-seated floating ball valves metal-seated floating ball valves can be applied in wide pressure and temperature ranges (150LB~2500LB and -46~450℃). The metal seat provides an optimal resistance against wear caused by abrasive services or hard particles. Size：1/2"~ 8"(DN15~DN200) Pressure Rating: ASME CLASS 150~2500(PN16~PN420) Body material：Carbon steel, Stainless steel, Alloy steel, Duplex stainless steel,exotic alloy etc. End connection：FLNG, BW Operation：Manual, Pneumatic, Electric, Hydraulic,ect. -
- Surface: Plated nickel or plated chrome or nature color.
- Size: 1/2'', 3/4'', 1''
- 200PCS every cartons. 2PCS keys every carton.
- Material: C37700, MS58(CuZn40Pb2), CuZn39Pb3, CW602N Thread ends
- Connection thread: NPT, BSP, BSPT
- Working Pressure: 16Bar-25Bar
- Working Media: Water, Steam, Oil etc 2-piece body, brass or iron ball, metal-to-metal body seal, PTFE seat, brass spindle
-
The lug type butterfly valve in ductile iron, Carbon steel or stainless is available with various seal options from Buna, EPDM, Teflon or Metal Faced. Handle or wheel options are available. Additional mounting of actuator limit switches Andy gear boxes are optional. A wafer butterfly valve’s function is to retain a seal to protect against dual-directional pressure differential in the flow of fluid. In other words, the wafer version of butterfly valves was designed to hold a tight seal, safeguarding against bi-directional pressure differential in order to avoid any backflow in systems that have been manufactured for uni-directional flow. This is accomplished by using a tightly fitted seal, such as an O-ring, gasket, precision machined, along with a flat valve face on the downstream and upstream sections of the valve. -
Applications- Slurries
- Heavy oils
- Non-flammable viscous fluids
- Waste water
- Clean water
-
- Model Number:GL41W
- Product name: JIS 10K Filter/Strainer
- DN:DN40-100
- NOMINAL PRESSURE:10K
- SUITABLE TEMPRESURE:≤150℃
- SEAL TEST PRESSURE:1.6MPa
- SHELL TEST PRESSURE:2.1MPa
- SUITABLE MEDIUM:Water,Oil,Steam,Nitrca Acid Corrosive Liquid
-
Product Overview
Integrated high temperature ball valve is overall high temperature ball valve which use the new sealing material for the valve seat, The service life is increased 3-5 times. The advantages ot this ball valve : stable performance, reliable sealing, small friction, light switch, high temperature resistance, wear resistance, oil resistance, corrosion resistance, long service life . Suitable medium: water, steam, heat conducting oil and other acids, Temperature：≤350℃。 -
Application standards:- Design and manufacture: API600, ANSI B16.34
- Face to face: ANSI B16.10
- Flange end: ANSI B16.5
- Inspection: API 598
- Pressure-temp rating: ANSI B16.34
-
Description Heating jacket is a device that maintains process media temperature in valve body. It is welded to valve body. After welding, there is an additional space between outside of the valve body and the inside of the jacket. It allows hot media to pass through, which is usually steam, hot oil or hot water. The standard SS 304 jacket can stand the thermal heating media no larger than 6 bar (87 psi), for larger pressure. -
The Globe Control Valve is a kind of top pilot single seat valve, which has simple structure, good sealing, high flow rate and stable application performance. Reasonable top spiral system can avoid vibration during small opening percentage, so as to extend valve working life. -
PRODUCT RANGE- Sizes NPS 1/2 to NPS 4
- Pressure: Class 800 to Class 2500
- SW, NPT, RF or BW
- Outside Screw & Yoke (OS&Y)
- Bolted Bonnet, Welded Bonnet or Pressure Seal Bonnet
-
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications.
