-
Basket type filter a small equipment which is used to remove small amount of solid particles in water,which consists of connecting pipe,main pipe,filtration basket,flange,blind flange and fastener,etc.When the liquid flows into the filtration basket through main pipe.solid impurity particles are blocked in the filtration basket,but the clean liquid will flow through the basket and be discharged through sewage outfall.when it needs to be cleaned,unscrew the bottom plug of main pipe,discharge the liquid and disassemble the blind flange,and assembly it again after cleaning.so it is easy to operate and maintain. -
- Valve Type: T-type strainer
- Connection Type: Flange
- Temperature Range: normal temperature
- Size: DN25~DN300
- Nominal Pressure: PN2.5MPa
-
SGL(Y)strainer is a kind of indispensable device for manual and oil and gas pipelines and various equipment.Itcleans up mediums inside pipeline so as to protect relief valve,pressure reducing valve,water level valve,water pump,etc.and ensure normal production.The valve shall be mounted at the inlet of pipeline.Generally,the water screen shall be 18~30 meshes/inch and ventilating mesh shall be 40~100 meshes/inch.The product could also be customized upon special requirement. -
- Model Number:GL41W
- Product name: JIS 10K Filter/Strainer
- DN:DN40-100
- NOMINAL PRESSURE:10K
- SUITABLE TEMPRESURE:≤150℃
- SEAL TEST PRESSURE:1.6MPa
- SHELL TEST PRESSURE:2.1MPa
- SUITABLE MEDIUM:Water,Oil,Steam,Nitrca Acid Corrosive Liquid
-
Stainless Steel Flanged Filter/Y Type Strainer PN16 SIZE:- Size: 1/2''-12''(DN15-DN300)
- Working Pressure: ANSI 150LB-2500LB, DIN PN10-PN320
- Filter screen: 20-160 meshes
-
Design Standards:- ANSI-125/150(Class150);
- DIN PN10/PN16;
- JIS-10K/16K,
- BS5163.
-
The flange Y Strainer is applicable to water, oil and gas. It's function is to allow scale and dirt residue to be caught, preventing the chance of damage to equipment. The strainer allows full flow of liquid with only minimal pressure loss. The removable cover allows easy access to the basket for cleaning. Face to face dimensions according F6. Stainless steel filter with round pierced screen, pierces diameter 1,5 mm for strainers up to DN 150, and 2 mm for strainers up to DN 300. Removable filtering element, threaded drain. Maximum working temperature <120°C. -
- Product Name: Y Strainer
- Size:1/2~12" (DN15~DN300)
- Working Pressure:150~600LB (PN16~PN150)
- Connection Type:RF, RTJ,BW, SW, NPT,WAFER
- Medium:Sea Water, Oil, Gas, Steam, Corrosive Fluid
-
- Y Type Strainer
- Bolted bonnet cap with drain plug
- Perforated stainless steel screen
- Strainer density 20 mesh,40 mesh,60 mesh,80 mesh,120 mesh, and so on design
- Full range of strainer density
- Renewable strainer density
- Flanged or butt welding ends
-
- Temperature of Media:Normal Temperature
- Standard or Nonstandard:Standard
- Pressure:Low Pressure
- Power:Manual
- Model Number:C3020
- Working temperature: -10 Celsius+120 Celsius
- Pressure: 1.6Mpa
- Media:Water, Air, Oil
- Thread Type:G
- Structure:Control
- model:DN15 / DN20
- Colour:white
- Material:copper/Brass
-
Features- General Purpose Y Strainer
- Working temperature 0 to 99 °C
- SS304 Filter Mesh 15MM-25MM 350 Micron. 32MM-50MM 500 Micron
- Maximum pressure rating 1600kpa
-
The valve is suitable for high-pressure applications of up to 16 bar. It has an inspection cap that makes it easy to check whether the valve is functioning properly. You'll commonly find this type of reverse flow valve used in gas lifts to allow for the circulation of pressure and prevent fluid from mixing. -
Applications include:- Heating systems
- Water treatment
- Gas flow control
- Liquid flow control
-
PN 16. Standard bore. Body brass UNE-EN 12165. Max. temp. 110ºC. Gas threaded ends (BSP) F-F - ISO 228/1. -
- Surface: Plated nickel or plated chrome or nature color.
- Size: 1/2'', 3/4'', 1''
- 200PCS every cartons. 2PCS keys every carton.
- Material: C37700, MS58(CuZn40Pb2), CuZn39Pb3, CW602N Thread ends
- Connection thread: NPT, BSP, BSPT
- Working Pressure: 16Bar-25Bar
- Working Media: Water, Steam, Oil etc 2-piece body, brass or iron ball, metal-to-metal body seal, PTFE seat, brass spindle
-
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications. -
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications. -
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications. -
Electric ball valve is a high energy saving and long life product.It is mainly used for on-off control of HVAC water system,It is composed of electric driver and valve body.The driver (actuator) is driven by synchronous motor with stable action.When the valve is opened and the door is closed, the motor starts (electric power consumption 6W), Open valve or close valve action cycle time is 5-15 seconds,More than two line electric valve energy saving tens of times.(Because the electric ball valve only in the valve opening or closing state to work, the two-line electric ball valve opening motor has been energized). Therefore, the life of this product is several times that of the two-line electric valve. -
Electric ball valve is a high energy saving and long life product.It is mainly used for on-off control of HVAC water system,It is composed of electric driver and valve body.The driver (actuator) is driven by synchronous motor with stable action.When the valve is opened and the door is closed, the motor starts (electric power consumption 6W), Open valve or close valve action cycle time is 5-15 seconds,More than two line electric valve energy saving tens of times.(Because the electric ball valve only in the valve opening or closing state to work, the two-line electric ball valve opening motor has been energized). Therefore, the life of this product is several times that of the two-line electric valve. -
Design Short Wafer type Double Flanged Centric Disc Butterfly Valves with Single Piece Rubber Lined Body Gray Iron / Cast Steel / Ductile Iron / CF8 / CF8M / CF3M / CD4MCuN Size Range 3" to 48" Shaft AISI 410 / AISI 304 / AISI 316 / AISI 316L -
Design and manufacture as per BS EN593 Face to face dimensions as per BS EN558 Series 13 Flange dimensions as per Gost 33259-2015 Pressure test as per BS EN12266-1 -
Our Electric Actuated Stainless Steel Butterfly Valve is designed for a variety of semi-corrosive and harsh environments. The unit comprises of a high performance electric rotary actuaor, fitted to a 316 Stainless Steel body, wafer pattern butterfly valve with stainless steel disc and shaft with EPDM or PTFE / EPDM liner options. Available voltages: 24V DC, 24V AC, 110V AC and 230V AC. -
Main material:- Body Materials: CARBON STEEL, STAINLESS STEEL, ALLOY STEEL, DUPLEX STEEL
- Seat Materials: NBR, EPDM, VITON, PTFE
- Disc Materials: Ductile Iron, WCB, CF8,CF8M, Al-bronze C958
- Stem Materials: SS416, SS304, SS316
- End Connection: Double Flange, Lug, Wafer
- Operate: Manual, Worm gear, Pneumatic, Electric-Motorized
- Disc type: With-pin, One stem no-pin, Double stem no-pin
-
The lug type butterfly valve in ductile iron, Carbon steel or stainless is available with various seal options from Buna, EPDM, Teflon or Metal Faced. Handle or wheel options are available. Additional mounting of actuator limit switches Andy gear boxes are optional. A wafer butterfly valve’s function is to retain a seal to protect against dual-directional pressure differential in the flow of fluid. In other words, the wafer version of butterfly valves was designed to hold a tight seal, safeguarding against bi-directional pressure differential in order to avoid any backflow in systems that have been manufactured for uni-directional flow. This is accomplished by using a tightly fitted seal, such as an O-ring, gasket, precision machined, along with a flat valve face on the downstream and upstream sections of the valve. -
Wafer Soft Seal Butterfly Valve uses the flexibility of rubber seat, could easily achieve zero leakage, Wafer type is the common style of butterfly valve and is less expensive than the lug type. The wafer butterfly valve is installed between two flanges. The valve is kept in place by using bolts or studs and nuts from flange to flange. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. -
Application criteria: Design: API 602/ASME 16.34/BS 5352 Pressure Test: API 598 tag: MSS SP25 SW Socket welding ends according to ASME B16.11 BW butt end by ASME B16.25 NPT threaded connectors according to ASME B1.20.1 Size range 1 / 4 "to 2" -
The forged steel check valves are manufactured according to API, ANSI, ASME standard, for industrial applications. The forged check valves can be piston type, ball type, swing check type.The cover is bolted, NPT threaded ends or socked weld ends. The body of the valve is in A105/F6, other materials are available upon request. -
Applications Clean water, raw water, Sewage, Slurry, Wastewater, viscous liquids, etc. It is widely used in industries like - Fire fighting, Plumbing, Water distribution, Water/Sewage treatment, Irrigation/agriculture, Sewage plants, Steel mills, Power stations, Chemical/process industries, HVAC, Sugar/food industry, Breweries, Mining and many more. -
Swing check valve, also known as a one-way valve or check valve, its role is to prevent the pipeline medium back flow. H44H swing check valve is to rely on the flow of the medium itself and automatically open, close the disc, used to prevent the reverse flow of the medium of the valve. Check valve is also a kind of automatic valve, its main function is to prevent the reverse flow of the medium, to prevent the reversal of the pump and the driving motor, and the discharge of the medium of the container. -
H44H swing check valve is a kind of automatic valve, its main function is to prevent the reverse flow of the medium, to prevent the reversal of the pump and the driving motor, and the discharge of the medium of the container. -
Flange swing check valve suitable for nominal pressure 1.6~25MPa. Operating Temperature -29~550℃ oil,chemical, pharmaceutical, fertilizer, power industry and other conditions of pipeline , for medium, water, oil, steam and acid media, etc. Swing check valve, also known as a one-way valve or check valve, its role is to prevent the pipeline medium back flow. H44H swing check valve is to rely on the flow of the medium itself and automatically open, close the disc, used to prevent the reverse flow of the medium of the valve. Check valve is also a kind of automatic valve, its main function is to prevent the reverse flow of the medium, to prevent the reversal of the pump and the driving motor, and the discharge of the medium of the container. -
Application Suitable for all concentrations of aqua, sulfuric acid, hydrochloric acid, hydrofluoric acid and all kinds of organic acids, strong acids, strong oxidants, also suitable for all concentrations of strong alkali organic solvents and other corrosive gases, liquid medium pipeline.
