-
PN 16. Standard bore. Body brass UNE-EN 12165. Max. temp. 110ºC. Gas threaded ends (BSP) F-F - ISO 228/1. -
Features 1. Blow-out Proof Stem 2. Investment Casting Body 3. Pressure Balance Hole in Ball Slot 4. Anti-Static Device Upon Request 5. Various Connection End Standard Available 6. Locking Device Available 7. ISO-5211 Mounting Pad for Actuator Available -
Applicable Standards: Ball Valve design according to API6D,BS5351,ASME B16.34 Face to face ASME B16.10,AP6D End Flanges ASME B16.5/ASME B16.47 Butt welded ends ASME B16.25 Fire Safety API607,API6A Inspection and test API 598,API6D Material: WCB Size Range: 2"~16" Pressure Rating: ASME CL, 150, 300, 600 Temperature Range: -29°C~425°C Type: Top entry, Flanged Ends -
Swing check valve, also known as a one-way valve or check valve, its role is to prevent the pipeline medium back flow. H44H swing check valve is to rely on the flow of the medium itself and automatically open, close the disc, used to prevent the reverse flow of the medium of the valve. Check valve is also a kind of automatic valve, its main function is to prevent the reverse flow of the medium, to prevent the reversal of the pump and the driving motor, and the discharge of the medium of the container. -
Ammonia globe valve should avoid impact vibration, Do not mix corrosive substances. It should also be noted that special ammonia valves are generally not used for other gases.To prevent misuse, some ammonia valves have special connections to cylinders.For example, hydrogen and propane both use left thread, also known as reverse thread, should pay special attention to installation. -
Product features- It has strong sterilization and detoxification functions to prevent the products from being contaminated with bacteria.
- The sealing pad is made of high temperature resistant PTFE composite material.(the highest temperature can reach 120 ℃ )
- Gasket, valve body in the sealing ring, stem packing all USES the high quality PTFE material.
- The sealing gasket can be replaced for convenient disassembly and low maintenance cost.
-
SGL(Y)strainer is a kind of indispensable device for manual and oil and gas pipelines and various equipment.Itcleans up mediums inside pipeline so as to protect relief valve,pressure reducing valve,water level valve,water pump,etc.and ensure normal production.The valve shall be mounted at the inlet of pipeline.Generally,the water screen shall be 18~30 meshes/inch and ventilating mesh shall be 40~100 meshes/inch.The product could also be customized upon special requirement. -
Medium: Water, Oil, Gas, Acid,Steam, gases, hot water, thermal fluids, hot oil, process water, vacuum facilities, ammonia etc. Materials: WCB,WC6,SS304,SS316 Size range: 2"-24" Pressure: 150LB-1500LB Temperaute: ≤ 425℃ -
Automatic Recirculation Valve (ARV) is a multifunctional valve that primary purpose is to ensure a pre-determined minimum flow is assured through a centrifugal pump at all times. This in turn has created a need for centrifugal pumps with high heads and low specific speeds.- Special design
- Gather both bypass and check features
- Lowest flow defense
- No outside actuation needed
-
Applications Clean water, raw water, Sewage, Slurry, Wastewater, viscous liquids, etc. It is widely used in industries like - Fire fighting, Plumbing, Water distribution, Water/Sewage treatment, Irrigation/agriculture, Sewage plants, Steel mills, Power stations, Chemical/process industries, HVAC, Sugar/food industry, Breweries, Mining and many more. -
Basket type filter a small equipment which is used to remove small amount of solid particles in water,which consists of connecting pipe,main pipe,filtration basket,flange,blind flange and fastener,etc.When the liquid flows into the filtration basket through main pipe.solid impurity particles are blocked in the filtration basket,but the clean liquid will flow through the basket and be discharged through sewage outfall.when it needs to be cleaned,unscrew the bottom plug of main pipe,discharge the liquid and disassemble the blind flange,and assembly it again after cleaning.so it is easy to operate and maintain. -
Features：- Double bellows
- Easy maintenance
- Bellows seal stem
- double seal
- position indicator
- non-rising handwheel
-
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications. -
- Temperature of Media:Normal Temperature
- Standard or Nonstandard:Standard
- Pressure:Low Pressure
- Power:Manual
- Model Number:C3020
- Working temperature: -10 Celsius+120 Celsius
- Pressure: 1.6Mpa
- Media:Water, Air, Oil
- Thread Type:G
- Structure:Control
- model:DN15 / DN20
- Colour:white
- Material:copper/Brass
-
The valve is suitable for high-pressure applications of up to 16 bar. It has an inspection cap that makes it easy to check whether the valve is functioning properly. You'll commonly find this type of reverse flow valve used in gas lifts to allow for the circulation of pressure and prevent fluid from mixing. -
Carbon steel ANSI class150 ball valve- Temperature range : -60℃ to 450℃
- Face to face : ANSI B16.10
- Flange dimensions : ANSI B16.50
- Wall thickness : ANSI B16.34
- Pressure rating : ANSI 150# , 300#
- All valves 100% test
- Pressure Class 150
-
Design Standards:- Design and mananufacture: API 6D and API 608
- Inspection and Test: API 6D and API 598
- RF flanged ends:ANSI B16.5
- Butt-welding ends: ASME B16.25
- Face to face: API 6D and SNSI B16.10
-
Design Standards:- ANSI-125/150(Class150);
- DIN PN10/PN16;
- JIS-10K/16K,
- BS5163.
-
H44H swing check valve is a kind of automatic valve, its main function is to prevent the reverse flow of the medium, to prevent the reversal of the pump and the driving motor, and the discharge of the medium of the container. -
Application criteria: Design: API 602/ASME 16.34/BS 5352 Pressure Test: API 598 tag: MSS SP25 SW Socket welding ends according to ASME B16.11 BW butt end by ASME B16.25 NPT threaded connectors according to ASME B1.20.1 Size range 1 / 4 "to 2" -
Design and manufacture as per BS EN593 Face to face dimensions as per BS EN558 Series 13 Flange dimensions as per Gost 33259-2015 Pressure test as per BS EN12266-1 -
Application: It is widely used in tap water, sewage, construction, food, electricity, medicine, metallurgy, textile, energy systems and other fluids pipeline as a regulator and shutoff device. -
Electric ball valve is a high energy saving and long life product.It is mainly used for on-off control of HVAC water system,It is composed of electric driver and valve body.The driver (actuator) is driven by synchronous motor with stable action.When the valve is opened and the door is closed, the motor starts (electric power consumption 6W), Open valve or close valve action cycle time is 5-15 seconds,More than two line electric valve energy saving tens of times.(Because the electric ball valve only in the valve opening or closing state to work, the two-line electric ball valve opening motor has been energized). Therefore, the life of this product is several times that of the two-line electric valve. -
Electric ball valve is a high energy saving and long life product.It is mainly used for on-off control of HVAC water system,It is composed of electric driver and valve body.The driver (actuator) is driven by synchronous motor with stable action.When the valve is opened and the door is closed, the motor starts (electric power consumption 6W), Open valve or close valve action cycle time is 5-15 seconds,More than two line electric valve energy saving tens of times.(Because the electric ball valve only in the valve opening or closing state to work, the two-line electric ball valve opening motor has been energized). Therefore, the life of this product is several times that of the two-line electric valve. -
Our Electric Actuated Stainless Steel Butterfly Valve is designed for a variety of semi-corrosive and harsh environments. The unit comprises of a high performance electric rotary actuaor, fitted to a 316 Stainless Steel body, wafer pattern butterfly valve with stainless steel disc and shaft with EPDM or PTFE / EPDM liner options. Available voltages: 24V DC, 24V AC, 110V AC and 230V AC. -
Features- General Purpose Y Strainer
- Working temperature 0 to 99 °C
- SS304 Filter Mesh 15MM-25MM 350 Micron. 32MM-50MM 500 Micron
- Maximum pressure rating 1600kpa
-
Stainless Steel Flanged Filter/Y Type Strainer PN16 SIZE:- Size: 1/2''-12''(DN15-DN300)
- Working Pressure: ANSI 150LB-2500LB, DIN PN10-PN320
- Filter screen: 20-160 meshes
-
- Standards:
- Design and Manufacture: ANSIB16.34, API600 API6D, API603,BS1414
- Face to face(end to end): ANSIB16.10, API6D
- Flange connection: 2″~24″to ANSIB16.5,
- 26″~36″to MSS-SP-44 to API605 on Request
- Test and inspection: API598,API6D
- Butt welded end: ANSIB16.5
-
We are specialized manufacturing superior grade Control Valve. These are the Control Valve that are widely used to limit the amount of flow in the hydraulic circuits of various industrial applications. Our offered Control Valve are equipped with a specially designed screw that exhausts the air. The offered valves are available in wide range of technical specifications which can be ordered at the best price in the industry. -
The forged steel check valves are manufactured according to API, ANSI, ASME standard, for industrial applications. The forged check valves can be piston type, ball type, swing check type.The cover is bolted, NPT threaded ends or socked weld ends. The body of the valve is in A105/F6, other materials are available upon request. -
Forged soft-seated floating ball valves Forged soft-seated floating ball valves are designed according to ISO17292 and are mainly used within applications with a wide pressure and temperature range (150LB~2500LB,-46℃~200℃). It is a cost effective alternative for small-sized trunnion mounted ball valves. The valves are fire safe designed and have been certified per API607 and API6FA. We offers two-piece and three-piece split body designs. -
Features and Benefits: Manual brass ball valves are available in various sizes to meet a range of applications. They feature a manual hand lever and can be made from brass, stainless steel and plastic. Ball valves are popular as they are reliable and durable and still close securely over long periods making them suitable for shutoff and control applications. -
PRODUCT RANGE- Sizes NPS 1/2 to NPS 4
- Pressure: Class 800 to Class 2500
- SW, NPT, RF or BW
- Outside Screw & Yoke (OS&Y)
- Bolted Bonnet, Welded Bonnet or Pressure Seal Bonnet
-
The Globe Control Valve is a kind of top pilot single seat valve, which has simple structure, good sealing, high flow rate and stable application performance. Reasonable top spiral system can avoid vibration during small opening percentage, so as to extend valve working life. -
Description Heating jacket is a device that maintains process media temperature in valve body. It is welded to valve body. After welding, there is an additional space between outside of the valve body and the inside of the jacket. It allows hot media to pass through, which is usually steam, hot oil or hot water. The standard SS 304 jacket can stand the thermal heating media no larger than 6 bar (87 psi), for larger pressure. -
Application standards:- Design and manufacture: API600, ANSI B16.34
- Face to face: ANSI B16.10
- Flange end: ANSI B16.5
- Inspection: API 598
- Pressure-temp rating: ANSI B16.34
